manualshive.com logo in svg

Comdial Scout 900 mxs, User Manual

Get reliable access to the Comdial Scout 900 mxs User Manual, available for free download only at manualshive.com. Equip yourself with essential knowledge about this efficient product through our comprehensive manual. Master all its features and functions to optimize your user experience.

Share
Download
background image

1.3.1

Reviewing Important Safety Instructions

Since your digital wireless telephone has both an AC power
supply and batteries, you should read and understand the fol-
lowing important safety instructions.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using your telephone equipment, always observe these
basic safety precautions to reduce the risk of fire, electric
shock, and injury.

1. Read and understand all instructions associated with this product.
2. Follow all warnings and instructions marked on this product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swimming pool).

5. Do not place this product on an unstable cart, stand, or table as it could fall causing seri-

ous damage to this product.

6. Slots and openings in this product’s cabinet back or bottom are provided for ventilation

to protect this product from overheating. Do not block these openings by placing this
product on a bed, sofa, rug, or other similar surface. Never place this product near or
over a radiator or heat register. Do not place this product in a built-in installation unless
the installation is properly ventilated.

7. This product should be operated only from the type of power source indicated on its

marking label. If you are not sure of the type of power supply to your home or office,
consult your dealer or the local power company.

8. Your product may be equipped with either a grounding-type attachment plug or a po-

larized attachment plug.

The grounding-type attachment plug is a three-wire grounding type that has a third pin
for grounding purposes It will only fit into a grounding type power outlet. This is a
safety feature. If you are unable to insert the plug into the power outlets at your loca-
tion, contact an electrician to replace your obsolete outlets. Do not defeat the safety
purpose of the grounding-type attachment plug.

The polarized attachment plug has one blade that is wider than the other. This plug will
only fit into the power outlet in one way. This is a safety feature. If you are unable to
fully insert the plug into the power outlets at your location, try reversing the plug orien-
tation. If the plug still will not fit, contact an electrician to replace your obsolete out-
lets. Do not defeat the safety purpose of the polarized attachment plug.

9. Do not allow anything to rest on the power cord. Do not locate this product where the

cord will be abused by people walking or moving equipment over it.

10.Do not overload wall outlets and extension cords as this can result in the risk of fire or

electric shock.

11.Never push objects of any kind through this product’s cabinet slots as the objects may

touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on this product or submerge it in liquid.

12.To reduce the risk of electric shock, do not disassemble this product. Take it to a quali-

fied service technician when it requires service or repair. Opening or removing this
product’s covers may expose you to dangerous voltages or other risks. Incorrect reas-
sembly can cause electric shock when this product is subsequently used.

Introducing The Digital Wireless Telephone

3

Summary of Contents for Scout 900 mxs







































































































Reviews:

No comments

Related manuals for Scout 900 mxs

Samsung TracFone SGH-T155G Series Manual Del Usuario preview
TracFone SGH-T155G Series
Brand: Samsung Pages: 56
Samsung TracFone SGH-T245G Manual Del Usuario preview
TracFone SGH-T245G
Brand: Samsung Pages: 88
Samsung Trender SPH-M380 Manual Del Usuario preview
Trender SPH-M380
Brand: Samsung Pages: 192
Spice D-88n User Manual preview
D-88n
Brand: Spice Pages: 54
Novatel SA 1100 User Manual preview
SA 1100
Brand: Novatel Pages: 25
Blu Dash Music 4.0 User Manual preview
Dash Music 4.0
Brand: Blu Pages: 20
Blu Dash Music 2 User Manual preview
Dash Music 2
Brand: Blu Pages: 28
Sony Ericsson WT19a Troubleshooting Manual preview
WT19a
Brand: Sony Ericsson Pages: 15
Archos 35 Titanium Faqs preview
35 Titanium
Brand: Archos Pages: 14
Micromax AD4500 Manual preview
AD4500
Brand: Micromax Pages: 40
Dotel DOT300 User Manual preview
DOT300
Brand: Dotel Pages: 37
GAI-Tronics L3149B Manual preview
L3149B
Brand: GAI-Tronics Pages: 92
OUKITEL WP 6 Quick Start Manual preview
WP 6
Brand: OUKITEL Pages: 60
Asus AiGuru S1 User Manual preview
AiGuru S1
Brand: Asus Pages: 92
Zte BLADE L7 User Manual preview
BLADE L7
Brand: Zte Pages: 58
Xiaomi Mi Note 10 User Manual preview
Mi Note 10
Brand: Xiaomi Pages: 103
IPRO Q6 User Manual preview
Q6
Brand: IPRO Pages: 23
Haier D2100 User Manual preview
D2100
Brand: Haier Pages: 8

Brands by name

Popular brands

Load more brands