Personalized Ringing Tone
Program a station to ring in one of several distinctive tones for proprietary digital telephones and in one of four
distinctive tones for analog telephones.
1. Go to STATIONS, then STATION PROGRAMMING.
2. Go to RINGING ASSIGNMENTS.
3. Highlight the station for which you wish to set the ringing tone.
4. From the Personalized Ring Tone drop-down menu, select the number of the ring tone you wish to assign.
5. Click APPLY.
6. Repeat steps 3–5 for each station on which you wish to set a personalized ringing tone.
IST Distinctive Ringing
Industry-standard telephones do not provide personalized ringing, but you can program them to ring differently
for intercom calls and outside calls, or to ring the same way for both types of calls.
NOTE: Do not enable distinctive ringing for voice mail ports.
1. Go to STATIONS, then CLASS OF SERVICE.
2. Go to PAGE 2.
3. Select the COS (Class of Service) group for which you wish to set IST Distinctive Ringing.
4. If you want outside calls and intercom calls to ring differently, make sure the IST Distinctive Ringing box is
checked. If you do not want different ringing patterns, leave the box unchecked.
5. Click APPLY.
Through Dialing (Thru-Dialing)
Thru-Dialing allows DTMF tones generated by an external IST device to pass through the system and out to any
line connection.
1. Go to STATIONS, then STATION PROGRAMMING.
2. Go to OPTIONS 2.
3. Click the Thru-Dialing box.
4. Click APPLY.
16 – Installing The ATI-D-1PT
IMI89–208
Installing And Programming The ATI-D-1PT