Programming Procedures
The ATI-D-1PT automatically identifies itself as an analog terminal interface for the digital station board as soon
as you connect it to the digital communications system.
Prime Line Programming
To set prime line type,
When you enable this feature, the system automatically selects a line, line group, or intercom number for use
when a station goes off-hook.
1. Go to STATIONS, then select STATION PROGRAMMING, then GENERAL.
2. From the Prime Type drop-down menu, select the type of Prime Type (no prime, line, line group, or
intercom).
3. Click on the button beside the Prime Type drop-down menu and select the line, line group, or intercom
number to serve as your Prime Type.
4. Click APPLY to add the changes to the database.
NOTE: When making changes to the VMMI database off-line you must save the database if you wish to have a
back-up copy.
If you are programming on-line, changes to the VMMI database take effect as soon as you click
APPLY. If you wish to create a back-up copy of the database after programming on-line, you must
archive the database on your PC.
10 – Installing The ATI-D-1PT
IMI89–208
Installing And Programming The ATI-D-1PT