Night Ring (Night Transfer Of Ringing)
Choose the line ports that you want to ring, along with the delayed ringing line ports, at stations during the night
ringing mode of operation. The ringing arrangement that you configure here is the arrangement that is active both
during the automatic night ringing time period and whenever the attendant manually activates the night transfer
(of ringing) operation. Note that the attendant-commanded night ringing period supersedes the automatic night
ringing period. Refer to the paragraph titled, Day 1, Day 2, and Night Ringing Begin and End Times, to set the
time for the automatic night ringing period.
1. Go to STATIONS, then STATION PROGRAMMING.
2. Go to RINGING ASSIGNMENTS.
3. Click on NIGHT RING...
4. Highlight the lines for which you wish to turn on Night Ring, and click ADD.
5. Click OK, then click APPLY.
Ring No-Answer Rings
This procedure sets the number of rings that sound at a station port before the call rolls over to ring at another
station. Any system feature that requires a ring no-answer value (for example, Call Forwarding) uses the setting
that you program here. The system defaults the ring no-answer value at station ports to four rings, and at voice
mail ports to three rings.
1. Go to STATIONS, then STATION PROGRAMMING.
2. Go to OPTIONS 1.
3. Highlight the station for which you wish to set the number of RNA rings.
4. From the RNA RINGS drop-down dialog, choose the number of RNA rings you wish to assign.
5. Click APPLY.
6. Repeat steps 3–5 for each station on which you wish to change the number of RNA rings.
Installing The ATI-D-1PT – 15
Installing And Programming The ATI-D-1PT
IMI89–208