Comdial 8412F Reference Manual Download

Page: 109 / 132

•

To determine how many calls are queued at the attendant position and
awaiting service (on hold, parked, or ringing),

1. Press the installer-programmed QUEUE button. The display will

indicate how many calls are in the ring queue and the hold queue,
respectively. The displayed information remains in the LCD
window momentarily.

NOTE: Hold recalls, transfer recalls and park recalls are counted in

the ring queue and not the hold queue.

•

To place an active call in a serial transfer,

1. Press the installer-programmed SERIAL button.

2. Dial intercom number or press associated DSS button.

3. Repeat to add up to two more extensions to the serial.

4. Press SPEAKER to end. Serial transfer begins.

•

To determine the status of individual lines (idle, busy or on hold),

1. Press the installer-programmed TEST/BUSY button (the LCD

will display the prompt Enter Line:).

2. Dial the line number to be tested (001–128). If the line is idle, you

will hear a dial tone; if the line is busy, the LCD will display Busy
with xxx; if the line is on hold, the LCD will display On Hold at
xxx (xxx = line number).

Large Screen Speakerphone Manual 10 – 3

GCA70–349

Using The Attendant Features

Summary of Contents for 8412F





































































































































Search results

Summary of Contents for 8412F

Reviews:

Related manuals for 8412F

Brands by name

Popular brands

Comdial 8412F, Reference Manual

Search results

Summary of Contents for 8412F

Reviews:

Related manuals for 8412F

Brands by name

Popular brands