manualshive.com logo in svg

Comdial 8412F, Reference Manual

Share
Download
Comdial 8412F Reference Manual Download Page 17

Feature

Definition

Erase

Use to delete an incorrect entry when programming
a speed dial number.

Exit

Ends a current programming session.

Feature Button

Presents several different features you can store at
programmable buttons for later use.

Forward All

Route all of your calls to a different station location.

Forward RNA All

Forwards all ring—no answer calls.

Forward RNA
Personal

Forwards only personal intercom ring—no answer
calls.

Group Listen

When chosen as a feature, stores a button that
enables loud speaker broadcast of distant party’s
voice.

Message

Turns on message waiting light at another station.

Music Source

Selects which music source will supply background
music.

Next

Shows the next display.

Options

Selects interactive button features.

Override

Overrides either a do-not-disturb condition or a busy
signal at a station you have called.

Paging Zone

When chosen as a feature, stores a button that
provides one-button access to paging.

Park Orbits

When chosen as a feature, stores a button that
provides one-button parking of calls.

Large Screen Speakerphone Manual  1 – 11

GCA70–349

Introducing The Large Screen Speakerphone

Summary of Contents for 8412F





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands