Comdial 8412F Reference Manual Download

Page: 39 / 132

3.6

Waiting For A Line (Queuing)

If all the lines in a line group are busy, you can place your telephone in a
queue to await an idle line. When you share a line with another telephone
and the line is busy, you can place your telephone in a queue to await the
idle line.

•

To queue for a line group,

1. Press INTERCOM.

2. Dial the line group access code.

3. Hear busy tone.

4. Dial

•

If you have line appearance for a particular line and wish to queue for
it,

1. Note the busy status light (LED).

2. Press INTERCOM.

3. Dial

✳

4. Press line button.

5. When line group is free, your telephone sounds several short tone

bursts. When you hear this, lift handset, hear dial tone, and place
call.

•

To cancel line queuing or line group queuing,

1. Press INTERCOM.

2. Dial

6 and hang up.

Large Screen Speakerphone Manual 3 – 9

GCA70–349

Making Calls

Summary of Contents for 8412F





































































































































Search results

Summary of Contents for 8412F

Reviews:

Related manuals for 8412F

Brands by name

Popular brands

Comdial 8412F, Reference Manual

Search results

Summary of Contents for 8412F

Reviews:

Related manuals for 8412F

Brands by name

Popular brands