background image

instruction for the user 

 

12

Self cleaning 

(optional)

 

At  least  once  a  week  a  thorough  cleaning  of  the  machine  is  necessary.  For  this  purpose  a 
specific  detergent/disinfectant  is  advisable.  The  use  of  such  a  product  offers  the  following 
advantages: 

• 

guarantee  of  perfect  hygienic  conditions  as  it  is  composed  of  active  detergents  and 
disinfectants 

• 

maintenance  of  the  machine  in  perfect  hygienic  conditions,  also  if  the  machine  is  not 
used. 

 
For starting the self cleaning sanitizing cycle, switch "Q2" has to be put into position "O". 
Empty  the  tanks  by  lifting  and  take  off  the  overflow  pipes,  remove  the  curtains,  close  the 
inspection  doors  and  press  push-button  "S26".  The  lamp  "H26"  is  illuminated  during  the 
whole period of the cycle. 
 

SAFETY DEVICE 

This machine is provided with numerous devices for ensuring the safety of the staff and the 
machine. 

Micro limit switch SS1 

When  the  rack  reaches  the  end  of  the  exit  table,  the  limit  switch  operates  and  stops  the 
conveyor and consequently the breaking of the crockery. By removing above, the conveyor 
automatically restarts. 

Doors micro switches SS2…SS20.. 

The door is provided with one safety micro switch. 
If the doors is opened, the functioning of the pumps, the motor reduction gear of the 
conveyor unit and the rinse solenoid valve are interrupted. The operation is resumed only 
after the doors are closed again and by pressing the start push-button "S1". In case of 
dishwashers with a complex lay-out, several push-buttons near the working stations may be 
necessary. 

Emergency stop push-button S3 

The  machine  is  provided  with  an  emergency  red  mushroom-shaped  push-button  on  yellow 
background  which  easy  accessible  from  operator,  if  pressed,  stops  all  motors  on  the 
machine. After elimination of the problem, the machine can only be started after turning and 
releasing the push-button and pressing again the start push-button "S1". In case of complex 
lay-out more push-buttons may require releasing near the work stations. 

Slip clutch 

The rack conveyor system is provided with a clutch-type mechanical torque control, which is 
fitted to the drive mechanism of the conveyor system. If something gets erroneously jammed 
in  between  the  machine  and  rack  or  the  rack  is  overloaded,  the  conveyor  system  quickly 
slows down to nearly zero. In this case it is necessary to switch off the machine by means of 
stop or emergency push-buttons, remove the obstacle and press again the start push-button. 
For adjustment of this safety device refer to paragraph MAINTENANCE. 

Summary of Contents for ACL100


























Reviews: