Reflect-O-Ray
®
EDS 6
Installation, Operation & Service
Combustion Research Corporation
SYSTEM ACESSORIES
Part No.
Description
0604.AS.16
COMBUSTION TUBE
Reflect-O-Tube 16 Ga. Aluminized steel combustion tube – 6”
O.D., 20’ long. Used directly downstream from the burner
assembly. One end swaged to fit into standard 0604.AS radiant
tube.
Wt. 80 lbs.
0604.AS.20
STANDARD RADIANT TUBE
Standard Reflect-O-Tube aluminized steel. 6” O.D, 19’-6” long
section of radiant tube.
Wt. 43 lbs.
0604.AS
STANDARD RADIANT TUBE
Standard Reflect-O-Tube aluminized steel. 6” O.D, 9’-9” long
section of radiant tube.
Wt. 21 lbs.
0660.00
REFLECTOR
Aluminum reflector, bright finish, 10’ long – designed to direct
radiant energy towards the floor area.
Wt. 7.5 lbs.
0661.00
COMBINATION HANGER
Radiant tube hanger formed from ¼” diameter zinc plated steel.
Wt. 2 lbs.
0662.00
INTERMEDIATE SUPPORT
Reflector support hanger formed from ¼” diameter zinc plated
steel.
Wt. 2 lbs.
0660.WH
REFLECTOR END CAP WITH CUT OUT
Aluminum reflector end cap with cut out for tube clearance.
Wt. 0.5 lbs.
0660.EB
REFLECTOR ELBOW
Aluminum, bright 90° reflector elbow.
Wt. 2 lbs.
0660.TB
REFLECTOR TEE
Aluminum, bright “TEE”, requires field assembly.
Wt. 1 lbs.
0315.AS
SCREW & SEALER PAC
High temperature paste sealer for all swaged radiant tube joints
and self drilling and tapping screws. Use two PAC’s per each
burner system.
Wt. 0.25 lbs.
Page 44