ML-FOS Installation Guide
ML-FOS QI
Copyright - refer to title page
Page 23
ENU Status: 1-0-0
Step 8: In the pop up window, choose the correct “COM” in the “Connect using” menu; it should be
consistent with the “PC series” setting in step 2.
Step 9: Click “Bits per second” to set the properties for the selected COM, in this case, select 9600 as
below:
Figure 23: Launch the CIT terminal-2
Step 10: Select “None” in the “Flow control” menu as below:
Figure 24: Launch the CIT terminal-3
