ML-FOS Installation Guide
ML-FOS QI
Copyright - refer to title page
Page 18
ENU Status: 1-0-0
5
COMMISSIONING
The system can be configured only after the link has been aligned through the CIT interface for local
commissioning and the NMS port for remote control. The local commissioning via CIT must be
performed on both sides of the link.
This section focuses on the local commissioning via the CIT wireless connection, please refer to the
separate NMS manual for ML-FOS NMS.
5.1
EQUIPMENT POWER-UP
Before applying power, check that the expected voltage, current, and power levels do not violate any
ratings. Double check all connections before applying power. Do not manipulate circuits or make
changes when power applied. System commissioning includes:
•
Prepare for alignment and configuration
•
Setup
transmission
•
Fine
alignment
•
Verifying
installation
•
Configuration
5.2
LAUNCH THE CIT
5.2.1 WIRE ACCESS TO CIT
The premise of wire access to CIT is a straight-through cable and a PC with ETH interface of GbE. To
launch the CIT terminal, follow the steps below:
Step 1: Click Program -> Accessories -> Communications ->choose Hyper Terminal. Note: Visa
system is without hyper terminal.
Step 2: Create a user Name, and then choose the first icon as below:
Figure 13: Launch the CIT terminal – step 2
