ONU User Manual
Page 9
Figure 2: ONU back and side panel
Table 1: ONU Interface Description
Interface
Description
PON
Optical fiber interface
Phone 1~2
VoIP interface
LAN 1~4
RJ-45 Ethernet Port, 10/100Mbps self-adapting
Use this interface to connect to local network
WPS
Support the WLAN terminal devices with WPS Push-Button function to
negotiate the encryption algorithm within 2 minutes, distribute the key,
configure relative parameters and set up connection
WiFi
Control WiFi open and close
Reset
The button to restore factory default by keep pushing for 3 seconds
USB
To connect USB flash disk/mobile hardware
Power
Power adapter interface
On/Off
Power switch
1.4 TECHNICAL SPECIFICATION
Table 2: ONU technical specification
PON Interface
Transmission distance
Max
：
20 km (Between OLT and ONU)
Transmission speed
Downstream: 1.25 Gbps
Upstream: 1.25 Gbps
Optical module connector
SC connector, no fiber jumper module
PON Port
1 x 1000 BASE-PX10
Comply with IEEE 803.2ah-2004
Optical specification
Downstream
– Wavelength: 1490nm
– Min. receive sensitivity: -26dBm
– Max. receive saturation power: -3dBm
Upstream
– Wavelength: 1310nm
– Min output optical power: -1 dBm
– Max output spectrum width (RMS): 3nm
EPON Feature
Control Protocol
Support MPCP according to IEEE802.3ah Standard
