Comba Telecom ML-HGU-F04P2T0W1N01 User Manual Download Page 24

Page: 24 / 93

ONU User Manual

Page 24

Table 11: Field Description

Field

Description

Interface/(Name) (read-only)

The number and name of the ETH
interface.

Connection Mode (read-only)

The connection mode selected for the
ETH interface.

Remove

Enable the check-box to remove the ETH
interface from the list.

Add

Click to add a connection. See ETH WAN
Configuration for details.

Remove

Click to remove a selected connection.

4. ETH WAN Configuration

If you have selected to add or modify an ETH interface connection, the ETH WAN Configuration

window opens; see Figure 17

Figure 17: ETH WAN Configuration window

Table 12 describes the fields of the ETH WAN Configuration window.

Table 12: Field Description

Field

Description

Select a ETH port

Select an Ethernet port for the ETH
WAN interface connection.

Back

Click to return to the previous
window.

Apply/Save

Click to save changes.

Summary of Contents for ML-HGU-F04P2T0W1N01






























































































Search results

Summary of Contents for ML-HGU-F04P2T0W1N01

Reviews:

Related manuals for ML-HGU-F04P2T0W1N01

Brands by name

Popular brands

Comba Telecom ML-HGU-F04P2T0W1N01, User Manual

Search results

Summary of Contents for ML-HGU-F04P2T0W1N01

Reviews:

Related manuals for ML-HGU-F04P2T0W1N01

Brands by name

Popular brands