ONU User Manual
Page 45
Figure 36: Add IP Filter -- Incoming window
Table 31 describes the fields of the Add IP Filter -- Incoming window.
Table 31: Field Description
Field
Description
Filter Name
Enter the name of the incoming IP
filter.
IP Version
Select the IP Version of the filter:
IPv4
IPv6
Protocol
Select the protocol of the filter:
TCP/UDP
TCP
UDP
ICMP
Source IP Address[/prefix length]
Enter the source IP address or IPv6
address prefix length.
Source Port(port or port:port)
Enter the source port number.
Destination
IP
Address[/prefix
length]
Enter the destination IP address or
IPv6 address prefix length.
Destination Port(port or port:port)
Enter the destination port number.
WAN Interfaces (Configured in
Routing mode and with firewall
enabled) and LAN Interfaces
Enable
Select All
or enable
individual WAN/LAN interfaces to
apply this rule.
Apply/Save
Click to save changes.
2. MAC Filtering
The MAC Filtering window enables you to control access to and from specific MAC addresses.
Select MAC Filtering from the Security submenu to open the MAC Filtering Setup window; see Figure
37
.
