30
On consignment of the machine
When the machine is consigned to the customer, an immediate check
must be performed to ensure all the material mentioned in the
shipping documents have been received and moreover to find out that
the machine has not suffered damage during transportation. If damage
has occurred, get the shipping agent to verify immediately the amount
and nature of the damage suffered and at the same time inform our
claim department. It is only by prompt action of this type that
compensation for damage may be successfully claimed.
Introductory comment
This is a floor cleaning machine which, using the mechanic abrasive
action of two rotary brushes and the chemical action of a solution
water-detergent, is able to clean any type of floor, picking up during
its advance movement, the removed dirt and the detergent solution
which has not been absorbed from the floor.
The machine must be used only for such purpose
. We would impress
upon you that any machine will function efficiently and operate
successfully, only if used correctly and maintained in fully efficient
working order. We therefore suggest you to read this instruction
booklet carefully and re-read it whenever difficulties arise in the
course of machine use. Our Service Department is at your disposal for
all such advice and servicing as may prove necessary.
TECHNICAL DATA
C85B
C100B
Cleaning width
mm
830
1000
Base side movement
mm
150
150
Squeegee width
mm
1110
1230
Working capacity
sqm/h
5400
6500
Brushes
∅
mm
430
510
Brushes rpm
rpm
180
180
Brushes pressure
kg
130max
150max
Brushes motor
W
1500
2000
Traction motor
W
1300
1500
Traction wheel
∅
mm
300
300
Movement speed
km/h
0
÷
6.5
0
÷
6.5
Max. gradient under full load
10%
10%
Suction motor
W
670
670
Suction vacuum
mbar
190
190
Rear elastic wheels
∅
mm
300x90
370x105
Solution tank
l
170
265
Recovery tank
l
190
280
Steering diameter
mm
2500
2800
Machine length
mm
1920
2040
Machine height
mm
1410
1900
Machine width
mm
870
1120
Measurements battery compartment (width x length x height)
mm 540x740x525
600x890x450
Batteries’ tension
V
36
36
Batteries
Ah in 5 h
420max
480max
Batteries weight
kg
420max
500max
Machine weight (empty and without batteries)
kg
450
585
Acoustic pressure level (in conformity with EN ISO 11201)
dB (A)
69.6
73.1
Vibration level to the hand
m/sqs
2.1
1.56
Vibration level to the body
m/sqs
1.05
0.98