53
BATTERIES
TYPE OF BATTERY
For the power supply of the machine, use the following battery types:
•
either lead batteries for traction use with tubular plates at free electrolyte;
•
or sealed batteries for traction at recombination of gas with gel technology.
DO NOT USE OTHER TYPES OF BATTERIES.
Every battery is made of elements type DIN connected in series and assembled in two
boxes each, each box supplies a power of 18V to the terminals.
The maximum dimensions and the weight of each box are:
C 85: width 500mm, length 350mm, height 505mm; weight 210kg
C100: width 590mm, length 420mm, height 435mm; weight 250kg
+
-
They have to be moved by means of appropriate lifting and transport equipment suitable
for their weight and dimensions.
The batteries have to be hooked to the four holes present in the upper part of each box.
They have to be inserted into the battery compartment with the battery terminals as
shown in the drawing.
They have to be connected in series, in order to obtain a voltage of 36V at the battery
terminals.
The electric connection process has to be carried out by specialised staff trained by a
Comac service center.
MAINTENANCE OF THE BATTERY
For the maintenance and the recharge follow strictly the instructions given by the
manufacturer of the batteries.
Pay particular attention to the choice of the battery-charger, which differs according to
the type and capacity of the battery.
DISPOSAL OF BATTERIES
When the battery is exhausted let carry out the disconnection by specialised and trained
staff, hook them on the four provided holes of the box and lift them with suitable means
out of the battery compartment.
IT IS OBLIGATORY TO HAND OVER THE EXHAUSTED BATTERIES, WHICH ARE
CLASSIFIED AS DANGEROUS WASTE, TO A AUTHORIZED INSTITUTION
CORRESPONDING TO THE DISPOSAL LAW.
