COMAC C100 ESSENTIAL Series, Use And Maintenance Manual

Page: 22 / 40

BRUSH HEAD BODY LATERAL MOVEMENT FUNCTION (BRIGHT VERSIONS)
If it becomes necessary to activate the “BRUSH HEAD BODY LATERAL MOVEMENT” function while working, press the brush head body
movement button (2) on the work screen.
N.B. : The scrubbing brush head will only begin to move towards the outside of the machine when the drive pedal is pressed.
N.B.
: If you wish to bring the scrubbing brush head back inside the machine, press the button (2).
N.B.
: when the drive pedal is released all the brush head motors stop with the respective delays. After the “Reset Delay” time, the brush
head will be moved back inside the machine and then moved to the idle position (raised off the floor). Even if the scrubbing brush head is in
the rest position, the lateral movement function is still active; indeed, when the drive pedal is operated, the brush head will be brought back
into the working position (in contact with the floor).
AUTOMATIC DETERGENT DOSING SYSTEM FUNCTION (BRIGHT VERSIONS)
If it becomes necessary to activate the “AUTOMATIC DETERGENT DOSING SYSTEM” function while working, press the brush head body
movement button (3) on the work screen.
N.B.
: The CDS system activates when the electric pump in the machine's water system is activated.
N.B. : if you want to deactivate the CDS system, press the button (3) again.
N.B. : Before starting any work, remember to start the CDS system.
COURTESY LIGHTS (OPTIONAL)
The machine can be equipped with courtesy lights to increase visibility of the parts which may need to be checked by the
operator. To activate these lights, simply press the switch (1) located on the steering column ( Fig.1 ).
1
REAR VIDEO CAMERA (BRIGHT VERSION)
Upon request, the machine can be fitted with a rear video camera, which allows you
to view the condition of the floor where you have just passed over, and it also helps
when reversing, allowing you to identify any obstacles. If it becomes necessary to
view the floor that has just been washed when working, touch your finger on the
screen at any point and move from left to right ( Fig.01 ); as soon as you do so, the
image from the connected video camera will be displayed, and on the right-hand
side of the display, the base parameters of the machine can be viewed.
N.B. : The machine uses a lever system for selecting the direction of travel; on
engaging reverse gear (see “ SELECTING THE OPERATING DIRECTION ” for
how to do this), the command display will show the image from the connected
video camera, and on the right-hand side of the display, the base parameters
of the machine can be viewed ( Fig.2 ).
Battery
20
% Solution
50
l Speed
12
Km/h
3 2 1
10.000
h
Hour meter
Advanced functions Regulations Programs
10.000
h
80
%
12
Km/h
Hour meter
Speed
Solution
Battery
50
l
2
1
BATTERY DISCONNECT BUTTON
If any serious problems are encountered during the work operations, press the battery disconnect button (1) on the
electrical system carter.
CAUTION : This command interrupts the electrical circuit between the batteries and the machine system.
N.B.
: To recommence work having stopped and once the problem has been resolved, switch off the machine and
turn the knob (1) in the direction of the arrows indicated on it.
1
22