COMAC C100 ESSENTIAL Series, Use And Maintenance Manual

Page: 18 / 40

HOUR METER (BRIGHT VERSIONS)
There is a box in the lower right-hand area of the command display work screen that allows you to see the partial time for
which the machine has been used (1). The digits that precede the "." symbol They refer to the hours, whereas the digits that
follow refer to the minutes.
The symbol (2) identifies which actuator is associated with the hour count; on pressing this symbol (2), a pop-up window will
appear, allowing you to select which partial hour meter to view. You can choose from:
Main switch.
Traction motor.
Brush motor.
Vacuum motor.
N.B. : The symbol (3) expresses the partial working hours as a percentage, with respect to the total working hours of the machine.
10.000
h
20
%
50
l
12
Km/h
Battery Solution Speed Hour meter
1
1
3
2
HOUR METER (ESSENTIAL VERSIONS)
The command display is located on the control panel, and the screen that appears after the start-up screen
displays the machine's total usage time.
The digits that precede the "." symbol identify hours, whilst the digit that follows it indicates hour decimals
(an hour decimal corresponds to six minutes).
When the “hour glass” symbol is flashing, it indicates that the hour meter is counting the appliance operating
time.
BATTERY CHARGE LEVEL INDICATOR (ESSENTIAL VERSIONS)
The control panel is equipped with a command display.
The graphic symbol that identifies the charge level of batteries appears at the bottom of the
command display.
The indicator consists of charge level symbols (1).
When the minimum remaining charge is reached, the graphic symbol (1) will start to blink, and will
turn off after a few seconds, after which the symbol (2) will start to blink. Under these conditions, the
machine must be brought to the battery charging area.
N.B. : A few seconds after the battery charge reaches the critical level (1), the brush gear
motors will shut off automatically. With the remaining charge it is possible to complete the
drying process before starting the recharge.
N.B. : A few seconds after the battery charge level reaches the discharge level (1), the vacuum motor will shut off automatically.
1
2
BATTERY CHARGE LEVEL INDICATOR (BRIGHT VERSIONS)
The graphic symbol that shows the charge level of the batteries appears on the
command display work screen.
The symbol is divided into three coloured sectors:
1. Numerical value (1): The number displayed (0÷100) indicates the percentage
charge remaining in the batteries.
N.B.
: As soon as the battery charge level reaches 20%, the numerical value
changes from white to green.
2. Circular symbol (2): the circle (divided into ten segments) indicates the percentage
of charge remaining in the batteries.
N.B. : Each segment corresponds with 10% of the total battery charge. As soon as the battery charge level reaches 20%, the outside of the
circle changes from green to red.
3. Battery silhouette symbol (3): the image depicting the battery (divided into five segments) indicates the percentage of charge remaining in the
batteries.
N.B. : Each segment corresponds with 20% of the total battery charge. As soon as the battery charge level reaches 20%, the outside of the
symbol changes from white to red and begins to flash.
Battery Solution Speed Hour meter
10.000
h
10
%
50
l
12
Km/h
Batteria scarica
2
1
3
18