COMAC C100 ESSENTIAL Series, Use And Maintenance Manual

Page: 21 / 40

N.B. :
Pressing the symbol (7) will activate the weight exerted on the scrubbing brush head adjustment screen (
Fig.4
).
N.B. : Moving the symbol (8) upwards on the adjustment screen will increase the weight exerted on the scrubbing brush head ( Fig.4 ).
N.B. : Moving the symbol (8) downwards on the adjustment screen will decrease the weight exerted on the scrubbing brush head ( Fig.4 ).
N.B. : The numerical value (9) indicates the percentage of weight exerted on the brush head, with respect to the maximum weight that can be
exerted during the working phase ( Fig.4 ).
ATTENTION: To prevent manual adjustment of the working parameters, deactivate the “MANUAL MODE” function; refer to the
dedicated paragraph in the programming booklet provided with the machine .
The machine is equipped with front and rear working lights. To activate them, move the switch
(1) on the control panel to the “I” position.
N.B. : If the function is active, the corresponding green LED will be illuminated.
N.B. : the sidelights come on when the machine is started.
N.B.
: If you wish to switch off the working lights, move the switch (1) to position “0”.
If it becomes necessary to activate the “EXTRA PRESSURE ON BRUSH HEAD BODY” function while working, move the switch (2) to position “I”.
N.B. : If you wish to deactivate the function, move the switch (2) to position “0”.
BRUSH HEAD BODY LATERAL MOVEMENT FUNCTION (ESSENTIAL VERSIONS)
If it becomes necessary to activate the “BRUSH HEAD BODY LATERAL MOVEMENT” function while working, move the switch (3) to position “I”.
N.B. : If you wish to deactivate the function, move the switch (3) to position “0”.
AUTOMATIC DETERGENT DOSING FUNCTION (ESSENTIAL VERSIONS WITH CDS)
If it becomes necessary to activate the “AUTOMATIC DETERGENT DOSING” function while working, move the switch (4) to position “I”.
N.B. : If you wish to deactivate the function, move the switch (4) to position “0”.
WORKING HEADLIGHTS FUNCTION (ESSENTIAL VERSIONS)
1 3 2 4
EXTRA PRESSURE FUNCTION (ESSENTIAL VERSIONS)
WORKING HEADLIGHTS FUNCTION (BRIGHT VERSIONS)
The machine is equipped with front and rear working headlights; to switch these on,
press the button (1) on the work screen.
NOTE : If the button is white, this means that the function is not active. If the
button is grey, this means that the function is active.
N.B. : the sidelights come on when the machine is started.
N.B. : If you wish to switch off the working headlights, press the button (1).
Battery
20
% Solution
50
l Speed
12
Km/h
3 2 1
10.000
h
Hour meter
Advanced functions Regulations Programs
1
2
3
21