SELECTING THE OPERATING DIRECTION
The machine has a lever for selecting the travel direction (1) under the steering wheel (
Fig.1
).
N.B. :
To select the forward gear you need to first shift the lever up and then in the direction indicated by the arrow (
Fig.2
).
N.B. :
To go from forward to neutral, first move the lever in the direction indicated by the arrow (
Fig.3
).
ATTENTION:
To select the reverse gear, you need to first shift the lever up and then in the direction indicated by the arrow (
Fig.4
). With reverse
gear engaged if you press the drive pedal a buzzer will sound and the white rear lights come on.
CAUTION:
the reverse speed is lower than the forward speed to comply with current health and safety standards.
N.B. :
In order to disengage the reverse gear, disengage the lever (1) underneath the steering wheel (
Fig.1
).
N.B. :
Once the lever (1) has been engaged in the reverse position, the acoustic signalling device will be activated in order to signal that the
machine's reverse gear has been engaged.
N.B. :
If the reverse gear is engaged with the squeegee in its working position, once the drive pedal is pressed, the machine will begin to move
in reverse and the squeegee body will be raised into its resting position.
N.B. :
If the reverse gear is engaged with the brush head in its working position, once the drive pedal is pressed, the machine will begin to
move in reverse and the brush head will remain in its working position, but the solenoid valve will stop dispensing detergent solution to the
brushes.
N.B. :
if you reverse with the video camera accessory (optional), the image is shown full screen.
4
1
2
3
1
ADJUSTING THE OPERATING SPEED
To adjust the operating speed, use the knob (1) on the gear lever (
Fig.1
).
N.B. :
It is possible to choose from three forward speeds; on the command display, the speed selected can be
viewed through the circular symbol (2) located in the lower part of the screen (
Fig.2
). The symbol is divided into
three sections, each of which corresponds to one of the speeds.
N.B. :
The current speed (3)of the machine is displayed inside the symbol (2), expressed in kilometres per hour
(
Fig.2
).
CAUTION:
adjust the forward speed to suit the adhesion conditions.
10.000
h
20
%
50
l
12
Km/h
Battery
Solution
Speed
Hour meter
1
2
1
3
2
BUZZER
The machine is equipped with a buzzer. if you need to sound a warning, just press the button (1) on the gear lever
(
Fig.1
).
1
1
ATTENTION:
As soon as the battery charge level reaches 20%, the brush head motors stop, while the vacuum motor keeps running for a short
time. With the remaining charge, it is still possible to move the machine to the location designated for recharging the batteries.
N.B. :
As soon as the battery charge level reaches 20% , a pop-up window appears in the centre of the display advising that the battery charge
level has reached critical level.
19
Summary of Contents for C100 ESSENTIAL Series
