COM-power corporation CLCI-400, Instruction Manual

Page: 9 / 30

Page 9 of 30
INSTRUCTION MANUAL
SEC TI ON 3
- PRODUCT I NFORMATION
Rev081219
Input/Output Port
When used for bulk current injection, this is the input port of the probe. When used as a
measuring device, this is the probe’s output port. It is fitted with an N -type coaxial connector.
Spring-loaded Clasps
These two (2) clasps, when secured over their respective brackets, lock the clamp into its
closed position
Clasp Brackets
These two (2) brackets anchor the respective clasps in order to lock the clamp into its closed
position.
Clamp Window
This clamp window is the aperture in the center of the clamp through which the wire(s),
cable(s) or cable bundle(s) to be tested are passed through.