COM-power corporation CLCI-400, Instruction Manual

Page: 25 / 30

Page 25 of 30
INSTRUCTION MANUAL
SEC TI ON 6
- CALIB RATION & TE ST PROCED URE S – RTCA D O-160 (Secti on 20 )
Rev081219
The information contained within this section is offered as guidance only. The relevant
standards and/or test plans should be consulted to ensure proper application of the tests
to be performed. The information provided is based on RTCA DO-160G, and may or may
not be appropriate for tests performed according to this or other editions of the standard.
Per RTCA DO-160, Section 20.3(c), the test frequencies are calculated based on
the number of frequencies per decade, as shown below:
Given below in Table 7, is a truncated example of the test frequencies.
There should be a total of 372 test frequencies for the frequency range of 10 kHz to
400 MHz.