Columbus AKS 70, Operating Manual, Page: 26 / 80

Vacuum sweeper
AKS 70|BM 62
REPLACING THE SIDE BRUSH:
This operation must be performed with the engine off and wearing gloves, using two 10 mm spanners.
1. Unscrew the three bolts Part. 4 Fig. 18 to detach the side brush Part. 1 Fig. 18 from the plastic flange Part. 5 Fig. 18 .
2. Replace the worn brush and screw up the bolts Part. 4 Fig. 18 to the flange Part. 5 Fig. 18 .
CHAP. 14 – EXTRAORDINARY MAINTENANCE
_____________________________________________________________________________________________________
THESE REPAIRS AND REPLACEMENTS ARE THOSE THAT HAVEN'T BEEN MENTIONED HERE. THEY MUST BE CARRIED OUT
BY PERSONNEL WITH TECHNICAL SKILLS TRAINED FOR THE PURPOSE. (SEE MANUAL COVER)
_____________________________________________________________________________________________________
CHAP. 15 – PUTTING OUT OF USE
    Remove the batteries from their housing and keep them in a dry and well-ventilated palce. To ensure a long lasting of unused
batteries charge them and eventually top up with distillated water every 30/40 days

 

Clean the dust filters and the bin. if necessary wash the bin as in instructions in “ Collection bin ” paragraph
CHAP. 16 – DISMANTLING
_____________________________________________________________________________________________________
DISMANTLING AND DEMOLITION ARE A CUSTOMER’S RESPONSABILITY. THESE OPERATIONS MUST BE PERFORMED IN
ACCORDANCE WITH APPLICABLE REGULATIONS, HANDING THE ENTIRE MACHINE OR ITS COMPONENTS TO COMPANIES
SPECIALISED IN SUCH SERVICES.
_____________________________________________________________________________________________________
CHAP. 17 – EMERGENCY SITUATIONS
In the event of any emergency situations such as, for instance: the machine has accidentally been driven over power cables and these have
wrapped around the central brush or side brush, or an unusual noise is heard coming from inside the machine or engine, hot materials,
inflammable liquids, chemical materials in general, poisons etc. have been picked up ETC:
PROCEED AS FOLLOWS:
1) Disengage the traction
2) Hardly press the brake pedal
3) Switch off the engine by the key on the dashboard or simply by leaving the driving seat as the safety micro switch under the seat
will automatically turn the engine off.
4) After picking up the above materials, remove the container (bin) part. 1 and 2 fig. 7 and clean it, wearing gloves and
mask to protect the airways. Follow the instructions in the "collection bin" paragraph.
26