30
P/N: 10001609 (REV AB) 627NH
December 2014
eLectRomotiVe systems Limited WaRRanty
Electromotive Systems, hereafter referred to as Company, guarantees that the drive has been manufactured by it against any defects of
material and/or workmanship for a period of two years from the date of shipment. Company makes NO OTHER WARRANTY, EXPRESSED
OR IMPLIED, AS TO THE MERCHANTABILITY OR FITNESS OF THE ITEMS FOR THEIR INTENDED USE OR AS TO THEIR PERFORMANCE.
Any statement, description or specification in Company’s literature is for the sole purpose of identification of items sold by the Company and
imparts no guarantee, warranty or undertaking by company of any kind. Components and accessories not manufactured by Electromotive
Systems are not included in this warranty and are warranted separately by their respective manufacturers.
Company’s sole liability shall be to repair at its factory, or replace any item returned to it within two years from date of shipment,
which Company finds to contain defective material or workmanship. All items to be repaired or replaced shall be shipped to Company
(Note: return authorization by Company is required) within said two year period, freight prepaid, as a condition to repair or replace defective
material or workmanship. Company’s herein assumed responsibility does not cover defects resulting from improper installation, maintenance,
or improper use. Any corrective maintenance performed by anyone other than the Company during the warranty period shall void the
warranty. Company shall not be liable for damages of any kind from any cause whatsoever beyond the price of the defective Company
supplied items involved. Company shall not be liable for economic loss, property damage, or other consequential damages or physical
injury sustained by the purchaser or by any third party as a result of the use of any Company supplied items or material.
Company neither assumes nor authorizes any other person to assume for Company any other liability in connection with the sale or use
of items sold by Company.
Materials or items may not be returned for credit, without the prior written consent of the Company. Any authorized return of materials
or items shall be subject to a restocking charge equal to 25% of the net invoiced amount ($100 minimum charge for all control products)
after Company determines that the material or item is in resalable condition. If upon receipt of the material or items returned, the Company
determines that said material or items cannot be resold without alteration or service, the Company reserves the right to reject the returned
materials or items and to send the same back to said purchaser at purchaser’s expense.
Any claim for errors in shipment or for material or time shortages must be receive by Company within 30 days of shipment and must be
accompanied by copies of the bill of lading and packing slip.
Refer to hoist manual for CM’s Repair/Replacement policy that applies to the hoist.
