17
P/N: 10001609 (REV AB) 627NH
December 2014
FUNCTION LEDS
NO.
Display
Lit
Flashing
OFF
12
When the drive detects
an alarm or error
When an alarm occurs
OPE detected
When a fault or error occurs
during Auto-TUning
Normal state (no fault or alarm)
13
When the REVERSE
command is given
—
When the FORWARD
command is given
14
Drive Ready Auto-Tuning
—
Programming Mode
15
Displays output frequency (Hz)
—
—
paRameteRs
There are hundreds of parameters, organized by function group, that determine how the drive functions. These parameters are programmed
in the drive’s software as measurable values or options-both of which will be referred to in this manual as settings. While some of these
parameters are associated with one setting, others are tied to a number of possible settings.
The IMPULSE•G+ Mini is configured for a specific hoist or trolley. If you find it necessary to change the initial settings, it is recommended
that you only allow qualified system technicians to program the drive. This can be accomplished by using the Password and Access Level
features. The factory must be contacted.
