29
End of season
· Please drain the water.
· Keep the unit running in Fan mode for two hours until the inside of the unit is dry.
· Turn off the unit and unplug it.
· Clean the air filter and after dry it thoroughly, reinstall it.
· Remove the exhaust pipes and keep them carefully.
· Wrap the unit with the plastic bag and keep it in a dry place.
TROUBLE SHOOTING
Before contacting professional service, check it first yourself referring to the followings
Problem
Cause
Solution
The air conditioner
does not
function.
No power supply.
Connect to power supply
outlet and switch on
“FT” flashes on the display screen
Drain water
Timer-off is running.
You can turn on the unit
three minutes later..
The air conditioner
restart
frequently
In direct sunlight
Close curtains.
Windows or doors open
many people or a heat
source in the room.
Close doors and windows
remove the heat source
Dirty filter
Clean or replace the
filter(s).
Air inlet or air outlet
blocked
Remove the blockage
The unit is too noisy
Unit stands uneven.
Place on an even, solid
surface (less vibration).
No work of
compressor.
Self protect of compressor
Wait for 3 minute and
restart again after the
descend of temperature
Cautions: Switch off the unit and unplug it immediately if anything abnormal happens. Then
contact a qualified electrician. Above data without advance notice for product improvement.
TECHNICAL DATA
The full technical specification can be found on the rating plate located on the device.
Power supply
220-240V ~50Hz
Cooling medium
R290/170g
Cooling efficiency
9000Btu/h (2.637kW)
Power consumption
1005W
Air flow
290m³/h
Fuse parameters of the machine
Type: T Voltage: 250V Current: 3.15 A
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Eldom Sp. z o.o., ul. Pawła Chromika 5a, 40-238 Katowice declares that the radio equipment
type PORTABLE AIR CONDITIONER KLC9050 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet address: www.eldom.eu/
deklaracje
