26
Installation of the outlet pipe
Attach the connector (17) to one end of the outlet pipe and attach the other end of the pipe to the
outlet (11) – drawing 3.
The connector (17) can be mounted on the mounting panel (18) and then placed in the window –
drawing 4.
The length of the panel (18) is adjustable.
Incorrect installation
The outlet pipe (16) should not be excessively bent – drawing 5.
Improper installation can result in the improper operation of the device.
There must be no sharp bends in the outlet pipe (16).
The air leaving the unit must flow freely.
NOTE
The length of the outlet pipe is designed in accordance with the air conditioner’s specifications.
Do not replace the outlet pipe with other hoses, or extend it, as this can cause malfunction of
the unit. The maximum length of the straightened outlet pipe is 1500 mm. Use the shortest
pipe length possible. It is most recommended to install the outlet pipe horizontally.
A
TIMER - used to start and stop the automatic operation of the device
B, O, P
fan speed selection (low, high)
C, E
buttons for setting the temperature (cooling) and time
(TIMER)
D
switching the device
on/off
F, S, T, W
selecting the operating mode
(cooling, dehumidification, fan)
G
lock
H
operation mode indicator - fan
I
operation mode indicator - dehumidification
J
operation mode indicator - cooling
K
display
L
wi-fi indicator
M
fan indicator - high speed
N
fan indicator - low speed
R
switching on the night mode
X
change of temperature units: °C, °F
THE OPERATION OF THE APPLIANCE
All changes in the settings are confirmed with a sound signal.
The air flow from the air conditioner should not be directed directly at people.
The cold air flow can be controlled by means of the louvres (3).
