Colortronic CTT 250, Operating Instructions Manual

Page: 70 / 93

8.3. Electrical Connection
» »
Observe the rules of the local electricity board.
Check that the supply voltage and the power frequency are in accordance
with the data on the name plate of the device.
The electrical connection may only be carried through or assigned by Color-
tronic service staff or by qualified staff authorized by Colortronic.
Other persons are not permitted to carry through the electrical connection.
The main switch must be freely accessible.
Ground the equipment against electrostatic charging.
F
Regularly make sure that none of the electrical or screw connections are
loose.
Make sure that the main switch is at “0" position before the electrical con-
nection is carried out.
The operating voltage is 400 V/3 AC/50 Hz.
Special voltages can be supplied on request.
64.10-0260GB05
06/03
CTT 250
Assembly instructions 8-3