manualshive.com logo in svg

Colortronic CTT 120, User Manual

Share
Download
Colortronic CTT 120 User Manual Download Page 5

5. Main te nance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.1. Main te nance sched ule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.2. Cleaning or Re placing the Air Fil ter . . . . . . . . . . . . . . . . . . . . . . . 39

5.2.1. Cleaning or Re placing the Re turn Air Fil ter . . . . . . . . . 40

5.2.2. Cleaning or Re placing the Air Fil ter of the Suc tion 
          Box (Op tional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.3. Dis posing of Drying Agents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.4. Check ing the Sig nal Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.4.1. Re placing the Bulb of the Sig nal Lamp . . . . . . . . . . . . 44

5.5. Cleaning the Drying Hop per . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

6. Tech ni cal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6.1. CTT 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6.1.1. Di men sion Sheet CTT 30 . . . . . . . . . . . . . . . . . . . . . . . 49

6.2. CTT 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

6.2.1. Di men sion Sheet CTT 60 . . . . . . . . . . . . . . . . . . . . . . . 51

6.3. CTT 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.3.1. Di men sion Sheet CTT 120 . . . . . . . . . . . . . . . . . . . . . . 53

7. An nex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7.1. Spare parts list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.1.1. Parts list CTT 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

7.1.2. Parts list CTT 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

7.1.3. Parts list CTT 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

7.2. Elec tri cal man ual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

CTT 30 / CTT 60 / CTT 120

Ta ble of con tents  5

Summary of Contents for CTT 120



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands