User Manual
www.colorlight-led.com Version: V1.0 2015/07/25
III.
Hardware Connection Diagram
iT7 hardware connection diagram is as below:
Fig.3-1
Illustrate
1. SupportDC 3.8-12V power supply
2. Signal connect
Connect the iT7 and the PC through DVI cable (DVI to DVI or HDMI to DVI)
3. Control signal connect
Connecting the computer and the iT7 with USB cable, the USB port of iT7 can be
used in any one of the two. This will be used for configuration of iT7 by operating
computer.
4. Ethernet Cable
Connect receiving cards and iQ7by using Ethernet cable (
Note:
The Ethernet
cable must be CAT5E or CAT6)
