User Manual
www.colorlight-led.com Version: V1.0 2015/07/25
Fig.5-9
If some Receiver (Receiving card) manage different quantity ofpixels from
others, specificReceiver (Receiving card) Size inWidth and Height can be set
individually.
3) Save to Receiver Cards & Save to Sender Cards
The first step:
Click “Save to Sender Cards” >
select port
, then send the parameter to
sender card
The second step:
Click “Save to Receiver Cards” >
select port,
to send the parameter
to receiver cards of this port load, at this moment, this port load all cabinets should display
normally (the picture between cabinets is not continuous but also as normal)
The third step: Set up the next port load receiving cards parameter and connection
type.
Please contact display manufacturer of engineering and technical personnel if display
abnormally.
