User Manual
www.colorlight-led.com Version: V1.0 2015/07/25
Fig.5-7
2) Receiver Card Parameters Setting
Configuration Receiver (Receiving Card) connection pattern for each port individually
if more than one port are used. There are two methods to set up.
Note: Set up connection Receiver (Receiving Card) must be based on fact.
Use Mouse Select One By One
Based on the actual connection of theEthernet cable, click the Receiver (Receiving
card) one by one until the last one for this network port loads, connection lines will show in
the display mapping area (Viewing from the front of led display)(As shown in 5-8)
Fig.5-8
Connection Pattern
Select the connection pattern based on fact, and then the connection line will show
Receiver (Receiving card) in the display mapping area. (As shown in 5-9)
