Page | 27
VERVE LED
12. Head Installation
Use this section, if Print Head is not installed in the printer.
The installation of Print Heads is to be done only by a service engineer. If the Print Head is not installed
correctly, it can affect the printing quality.
The following print head is used in the machine:
Fig 29: Displaying the Print Head
Note: Don’t apply much pressure on
Print Head
while handling it.
Follow these steps to install the Print Head:
Step 1
: Unscrew the
M4 Allen Screw
s from both sides of the print head to remove the head cap, as
shown below:
Fig 30: Unscrew the M4 Allen Screws