Page | 23
Verve LED
12. Head Installation
Use this section, if Print Head is not installed in the printer.
The installation of Print Heads is to be done only by authorized service engineer. If the Print Head is not
installed correctly, it can affect the printing quality.
Note: Don’t apply much pressure on
Print Head
while handling it.
Follow these steps to install the Print Head:
Step 1:
Switch OFF the software and then printer.
Step 2
: Make sure that sub tanks are closed. If not, move the Negative Pressure Knob in the anti-clock
direction, as shown below:
Fig 22: Closing the Sub Tanks
Step 3:
Fix the Head I/O board on its mounting bracket by tightening all the screws provided with the
machine, as shown below:
Summary of Contents for VerveLED VLR 2513
Page 1: ......
Page 49: ...Page 48 Verve LED...
