Page | 19
Verve LED
Step 8:
To initialize the machine, first open the Print Control Center and get it ready for use. Now, the
machine starts initializing automatically. Firstly, the machine initializes the
Z Axis
, then the sequence is
Y
Axis
→
X Axis
→
Again Z Axis
.
Step 9:
Switch ON the Print Bed vacuum by pressing the
Bed Vacuum
button available on the front left
side of the machine, as shown below:
Note:
a.
Carriage path must be obstacles free.
b.
Ensure that Z height must be enough to move smoothly over the print bed.
Step 10:
Switch ON the required vacuum chambers by moving the Vacuum Chamber knob, as shown
below:
Fig 17: Switch ON the Vacuum Chamber
Summary of Contents for VerveLED VLR 2513
Page 1: ......
Page 49: ...Page 48 Verve LED...
