Page
20
of
62
Metro (Konica Head)
Step 5:
Put on gloves, goggles, and face mask for safety
Fig 16: Using Safety Precautions
Step 6:
Keep ready the following items:-
•
Glue container(500-600ml), whichever required
•
Home cleaner liquid spray
•
Pouring container
•
Waste bin
•
Woven cotton bud sticks (for spreading the glue)
Glue Coating Procedure
Note
: Extreme care to be taken during the glue process, any negligence may render the coat unsuitable
for use, and complete process may be required to be repeated. 3 persons will be required for this process.
Follow these steps to start the glue coating process:
Step 1:
Put the Press Roller down.
Step 2
: Set the Belt Movement (Refer to the
“
BELT MOVEMENT
”
section) and switch ON the dryer.
Note:
Belt movement should be slow.
Step 3:
Go to the back of the machine. Pour the 70% glue equally throughout the belt, near the Press
Roller, leaving the 10cm from both the edges.
Step 4:
Let the two persons hold the Press R
oller firmly, so that it doesn’t move.
Fig 17: Closing the Press Roller
