Replacement of fabric Maintenance Guide
37
6
Replacement
of fabric
6.1 Introduction
Replacing the fabric or re-stretching is possible, however this must only be
performed by well trained staff.
A training movie is available and can be obtained via
your local Signify contact.
With below link the following technical information can be downloaded:
• Re-stretching video
• Re-stretching manual (separate or a part of the service manual)
• Re-stretching tools and overview (tools are mandatory for a
correct installation)
Link to:
https://www.datasharing.signify.com/index.php?key=20190416-9C3E0
Required new material:
•
Fabric
The total length of the front fabric and the diffusor fabric to order is the
length of the panel + 400 mm for each. Be aware that this in total is more
than two times the length of a Luminous Textile.
• Frame springs
These springs can break during the procedure, so some spares
are advised.
Spring coils
Length: 0.5 m.
Quantity calculation:
Add the length and width of the panel in meters and multiply by 8 to
calculate the required number of spring coils.
For example, in case of a 6.48 x 1.20 m panel:
(6.48 + 1.20) x 8 = 61.44 spring coils -> 62 pcs
(advisable to order 66 pcs).
• Additional tools
LTP repair KIT
Before the re-upholstering or re-stretching is started, verify that all tools and
other hardware required are available.
for required tools.
6
