Collomix VIROneo VIBA X.30, Service Menu

Page: 14 / 21

Service Menu VIBA X.30
2021-05-05 Seite 14/21
5.5.2 TEST CLAMP MED
TEST CLAMP MED
800
+ - CLAMP
TEST CLAMP MED
Clamping
405mm 10000
800
FULL- OPEN OPEN
TEST CLAMP MED
Clamping
177mm 16120
800
clamped 800
FULL- OPEN OPEN
Setting of large clamping force (CLAMP HIGH)
+ = Increase value
- = Decrease value
CLAMP = Can is clamped
The CLAMP MED is used when the canhight is
in between
HEIGHT
LOW and HEIGHT HIGH value set.
To test the clamping force place a suitable can or a measuring
device in the centre of the clamping plate.
The measuring device must be larger than the HEIGHT LOW and
lower than the HEIGHT HIGH value set.
The clamping routine is started via the CLAMP function. The current
opening of the mixing unit can be read in display together with the
current value of the rotary encoder.
After the end of the clamping procedure "pot clamped XX" is shown
on the display. XX stands for the clamping parameter used during
clamping and should not significantly deviate from the parameter
set.
The mixing unit can subsequently be reopened via FULL-OPEN or
OPEN.
FULL- OPEN = Mixing unit opens completely
OPEN = Mixing unit opens
IMPORTANT:
The CLAMP MED parameter does not correspond to the clamping
force. The clamping force resulting from the parameter must be de-
termined with a suitable measuring device.