Service Menu VIBA X.30
2021-05-05 Seite 12/21
5.4.1
SELECT HEIGHT
SELECT HEIGHT
100mm 220mm
LOW
HIGH
EDIT HEIGHT 1
From MEDIUM to
LOW clamp
100mm
+
-
Selecting change over points from which the clamping force is
changed form small (CLAMP LOW) to medium (CLAMP MED) to high
(CLAMP HIGH).
+
= Increase value
-
= Decrease value
Key E
= Quit submenu
The setting value corresponds to the opening of the mixing unit
in millimetres measured from the mixing table upwards.
5.5
SET CLAMP FORCE
SET CLAMP FORCE
500 800 1200
LOW
MED
HIGH
Three clamping pressures can be set in the SET CLAMP FORCE
menu. With this small, medium and cans will always be maintained
with an adapted clamp force during mixing.
LOW
= Clamping force for small cans
MED
= Clamping force for medium cans
HIGH
= Clamping force for large cans
I
M
P
O
R
T
A
N
T:
With a too low clamping force the can can become loose during the
mixing process. With a clamping pressure set too high the can can
burst when clamped.
After the clamping force has been set a test run must always be
carried out with original material in original container.
CLAMP MED
HE
IG
H
T
LOW
HI
G
HT
H
IG
H
CLAMP LOW
CLAMP HIGH
