5.2 DIL-switches
The dispenser board contains two DIL-switches. These switches are used to select different
operating modes. The following table and figure 24 show the functions and the positions of the
DIL-switches:
Switch
Function
Off
On
TEST
Labelingmode/ Testmode
Labelingmode
Testmode
DIR
Turning direction of the motor
Right
Left
Figure 24: DIL-switches
5.2.1 DIL-switch TEST
This DIL-switch selects the testmode. For further informations to the testmode, please read the
chapter
Testmode
.
5.2.2 DIL-switch DIR
This DIL-switch selects the turning direction (right or left) of the traction motor.
T E S T
D I R
E i n
A u s
5999.515-01E 12.06.2007 WM
Page 23 / 47