ENGL
IS
H
8
4. Place the juice extractor screen so that the wider end covers the blades on
the bottom of the jug. Turn the screen assembly until its cut-outs fall over the lugs
in the jug and locks into place.
5. Place the lid (2) onto the jug and turn it clockwise until it locks into place.
6. Place the assembled jug with blade assembly onto the motor unit by aligning
the unlock symbol
on the blade assembly with the
▲
symbol on the motor unit.
7. Turn the container until the lock symbol is aligned with the
▲
symbol on
the motor unit.
Note:
The blender will not start unless all the parts are assembled
correctly.
8. Plug the mains lead into a wall socket.
9. Turn the blender on by turning the function knob to
HI
.
10. Drop the pieces of fruit through the hole in the centre of the lid and insert the food
pusher (5) into the hole. Gently push down the food pusher when needed.
11. Turn the function knob to the
OFF
position once you have finished blending.
12. Unscrew the jug with blade assembly from the motor unit and pour the ingredients
into another container.
Using the jug without the juice extractor screen
Note:
Never remove the lid of the jug while the blender is on.
1. Make sure that the mains lead plug is completely unplugged.
2. Screw the cross-blade assembly (7) onto the jug (making sure that the blade
assembly gasket is in place). Tighten properly, but do not overtighten.
3. Fill with ingredients. Make sure that you do not fill over the MAX mark.
4. Place the lid (2) onto the jug and turn
it clockwise until it locks into place.
Make sure that the pour openings in
the lid are in line with the spout.