Coleman Powersports AT125UT, Owner'S Manual

Page: 65 / 78

To tighten drive chain,
1. Loosen the chain adjuster nut(#1) on the back side of the carrier/housing tap.
2. Tighten the chain adjuster nut s (#2) to move the carrier/housing forward .
3. When proper chain slack is achieved tighten chain adjuster nuts (#1,3) .
To loosen drive chain,
1. Loosen the chain adjuster nut(#1) on the back side of the carrier/housing tap.
2. Loosen the chain adjuster nuts(#2,3).
3. Tighten the chain adjuster nuts(#1) on the back side of the carrier/housing tap. To move the carrier/housing rearward .
4. When proper chain slack is achieved tighten chain adjuster nuts (#2,3) .
Drive chain slack:
6.0-12.0 mm (0.24-0.47 in)
Tightening Torques:
14 Nm / 10 ft/lbs Chain Adjuster Nuts (#1,2,3)
45 Nm / 33 ft/lbs Carrier/Housing Bolts
Cleanin g L ubricating D rive C hain
The drive chain must be cleaned and lubricated at the intervals specified in the periodic maintenance and lubncat1on chart, otherwise
it will quickly wear out, especially when riding in dusty or wet areas. Service the drive chain as follows.
1.Remove all dirt and mud from the drive chain with a brush or cloth.
2.Spray chain lubricant on the entire chain, making sure that all side plates and rollers have been sufficiently oiled.
NOTICE
The drive chain must be lubricated after washing the ATV or riding in the rain or wet areas.
3.Tighten carrier housing bolts.
55