Cole Parmer IPSW 100, User Manual

Page: 9 / 33

Page 5
SETTING UP THE SCALE
•
Remove the Indicator from its box and fix it to the U shaped bracket using the
two fixing handles. Take the Indicator and place it onto the pillar ensuring the
slack cable is pushed inside. Fix the Indicator to the pillar using the screw
provided.
•
Remove all upper internal packaging, place the pillar into the base bracket
fitting and remove the complete machine from the box. Remove any plastic
bags that may have been used for protection.
•
Fix the pillar to the base bracket fitting using the screws provided
•
Adjust the viewing angle of the Indicator to the ideal position and tighten two
the locking handles.
•
Level the scale by adjusting the adjusting feet until the bubble is in the center of
the level indicator. If the scale rocks, re-adjust the feet.
NOTE: Use of a food-safe grease is recommended on the threaded part of
the feet to keep them turning freely.
•
Attach the power input connector to the indicator, plug in and turn on the
external power supply and press the [On/Off] key. The software revision
number will be displayed followed by a self-test showing all digits before the
zero is displayed along with the unit of weight that was last used.
•
Optional connections to RS232 port and relay wiring port should be made if
required.