Cole Parmer IPSW 100, User Manual

Page: 19 / 33

Page 15
F3 bEP
This parameter sets the
Beeper to off or on. If set to on,
the beeper can further be set
to sound when the weighing
result is within or outside the
check-weighing limits. bP oFF - Off
bP inL - Within limits
bP otL - Outside limits
(>20d)
bP inL
F4 nCK
This parameter enables
negative check weighing
function with ability to do
negative tare. on
oFF
on
PERCENT WEIGHING
AND
ANIMAL WEIGHING
See section 6.7 and 6.8 for details of using these special weighing modes.
•
Press [
➔
0/T

] to enter a parameter. Use the [Unit/

] key and [Pcs/

] key to set
the values or just the [Pcs/

] key to select the options.
•
Press [
➔
0/T

] to confirm the change and then advance to the next parameter by
pressing the [Pcs/

] key.
•
Press [Print/M+/Esc] to return to the group
“FUnC 2”
. If you press [Print/M+/Esc]
again, the scale will exit the User Parameter section and return to weighing.
Parameter Description Options Default
setting
P1 PCt
This parameter allows the user
to enter the Percent weighing
Function. See Section 6.7.
None Enabled
always
P2 Ani
Enter the Animal Weighing
mode of operation, See section
6.8 Set the filter value. Enabled
Always
RS-232 PARAMETERS
•
Press [
➔
0/T

] to enter a parameter. Use the [Unit/

] key and [Pcs/

] key to set
the values or just the [Pcs/

] key to select the options.
•
Press [
➔
0/T

] to confirm the change and then advance to the next parameter by
pressing the [Pcs/

] key.
•
Press [Print/M+/Esc] to return to the group
“FUnC 3”
. If you press [Print/M+/Esc]
again, the scale will exit the User Parameter section and return to weighing.
This group of parameters can be configured by the user for setting the RS-232 active or not,
baud rate, printing mode, accumulation mode, RS-232 language, and user or scale ID
numbers.
Parameter Description Options
Default Values or
setting
C1 on
Enable or disable the
RS-232 interface
Prt on
Prt oFF Prt on