7.2.7. A proprietary retort stand and clamp should be used to securely hold and
position vessels over the Bunsen ceramic heating bowl.
7.2.8.
Parts of the Bunsen get very hot during operation
, do not move the
Bunsen when still connected to power or still hot.
Refer to diagram of hot zones
at the end of section 2.2
and 3.2 for safe operating distance.
7.3.
Use without an MC controller.
7.3.1. Plug the IEC end of the mains cable into the Bunsen IEC lead. Connect the moulded
plug to your power supply and switch on at the mains.
NOTE: The Bunsen will commence heating
on full power immediately
, ensure it is
position
ed
in a safe environment, see paragraph 3.2 – General Safe Operating Practice.
7.2.9.
Do not
fill the inner ceramic bowl with liquid or any other substance.
12
