Cole Parmer 05017-10, Manual

Page: 27 / 45

Tuesday:
Repeat steps from Monday except Step 2. Have oven shut down after
100°C operation.
Wednesday:
Repeat Tuesday.
Thursday:
Repeat Monday.
Friday:
Repeat Monday.
Using the information in MENU 6 (Table 7: Program Edit Mode), the
program could be set up as shown in the Sample Program Array on the
following page.
The default settings for any step are: TEMP- OFF, PUMP- OFF, and
TIME- 12:00 AM. The outlined areas in the Sample Program Array chart
indicate actual program editing. Notice the final step programmed for each
day is copied through to the end of that day. This was accomplished by
selecting Y (yes) at the ‘?’ menu (see MENU6, Step 6).
To execute a program, press the MENU key until the upper display shows
PGRM. Press the UP key to display ON, then press SET or wait
2 seconds and control will return to the default mode automatically. The
program will then search for the current day and begin execution at the
most recent step.
To stop program execution, press the MENU key until the upper display
again shows PRGM. Press the DOWN arrow key to display OFF, then
press SET or wait 2 seconds for the program to stop automatically.
Vacuum Oven 6-9 Cole-Parmer
Section 6
Operation
Programming the Oven
(continued)
Program Execution -
Enabling/Disabling