User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
19
Temperature is displayed TT (TT = temperature, Deg C or Deg F,
see option 4).
The time will display for 15 seconds, followed by the date (if
enabled) for 2 seconds, followed by the temperature (if enabled)
for 2 seconds, then back to the time display.
The Crossfade style option is when a digit changes value (seconds
counting up, etc) the old digit fades out while at the same time the
new digit fades in. This is a user preference, and other than
changing the look of the digits as they change, has no other effect.
The Slot effect option is when a digit changes value (seconds
counting up, etc) the old digit rapidly cycles different digits until it
reads the new value, looking something like a slot machine. This is
a user preference, and other than changing the look of the digits as
they change, has no other effect.
The Slide Across style option is when a switching to a different
display value (time/date/temperature). The old digits “slide” off the
display on the right side and the new digits slide in from the left
side. This is a user preference, and other than changing the look of
the digits as they change, has no other effect.
A blinking '00'
→
'03', '10'
→
'13', '20'
→
'23', '31'
→
'33' will be
displayed in the 2 rightmost digits, indicating the selected display
style. To change the style, press the black function button (left
side). Press the red mode button (right side) when the desired
display style is shown. The next option will be displayed.
To cancel the option mode, press and hold the red mode button
until the display goes blank. Release the mode button and the clock
will go back to normal operation. Option 1 & 2 will still be saved,
but option 3 will not be saved.