User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
38
6.1.5
Option 4 – Date/Temperature display interval value
Display: “04
☐☐
☐☐
”, ‘04’ blinking.
This option changes the date and temperature display interval
value.
"
This is the time in seconds that the date and temperature is
displayed.
"
The value range is 1 to 24 seconds.
A blinking '04' will be displayed in the 2 leftmost digits, indicating
Option 4, date/temperature display interval value. To change the
interval value, momentarily press the black function button (left
side). This enters change value mode, the ‘04’ will stop blinking.
Change the current value by pressing the black function button.
Holding in the black function button will speed up the change rate.
This will increase the value.
To change the direction of the change (value goes up or down),
momentarily press the red mode button, this will toggle the right
most colon on/off:
o
Right most colon off – black button will increase
value.
o
Right most colon on – black button will decrease
value.
o
Note: The right most colon does not indicate if the
value is + or -, only the direction the value changes
when the black button is pressed.
To exit the change value mode, press and hold the red mode button
until the display goes blank. Release the mode button and the clock
shows a blinking option number.