User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
28
5.1.17
Setting the ON time
The ON time setting is indicated by the rightmost colon on.
Setting the display ON time is accomplished by using both the
mode button and the function button.
The hours digits will be flashing on and off once a second, and the
minutes digits will be on steady. The black function button (left
side) will change the hour value. Holding the function button on
will quickly cycle through the hours (0-23). Note: When setting the
hours, 24 hour mode is used, regardless of the hour format setting
(12/24 hour display mode). This means '00' is 12 AM (midnight),
and '13' is 1 PM (afternoon).
Once the hours are set correctly, press the red mode button (right
side) to change to the minute value. When the mode button is
momentarily pressed, the minutes digits will flash on and off once
a second. The black function button will change the minute value.
Holding the function button on will quickly cycle through the
minutes (0-59).
After the minutes are set correctly, momentarily press the red
mode button. At this point, the ON time setting is complete, and
will now go back to normal time display.
To cancel setting the ON time value at any point, press and hold
the red mode button until the display goes blank. This will cancel
setting the ON time. When the mode button is released, the clock
will go back to the normal display.
After the ON time is set, the clock will go back to normal time
display.