Page 9 of 12
fearless
Installation guide
5. Software setup
After you have mounted and aligned your fearless device at the appropriate
position, you can start with the software setup. Make sure to configure
no more
than 1 device at the same time,
the housing is
already mounted on the wall
and
the
sensor is roughly aligned
. Please have the serial number of your device (to be
found on the underside of the packaging) ready for further steps. If problems occur
during setup, please press the button on the upper side of the white housing for
approx. 8 seconds (see illustration) and then restart the setup procedure.
Setup problems: Press the button for 8 seconds.
Step 1: Start setup
Start the device by connecting the power cable and the power supply to the power
outlet.
Now activate the WiFi of your smartphone or laptop and connect to the
corresponding WiFi network:
fearlessAP-XXXXXXXX.
(it can take up to 2 minutes
to display the corresponding network) The last 6 characters are different from
device to device. The password is
fearless.
Newer versions of Android devices require explicit confirmation that you want to
connect to a WiFi without an Internet connection. Please confirm this query to
keep the network.
